Background Analog and Digital Calibration Techniques for Pipelined ADC’s

DSpace/Manakin Repository

Background Analog and Digital Calibration Techniques for Pipelined ADC’s

Show full item record

Title: Background Analog and Digital Calibration Techniques for Pipelined ADC’s
Author(s):
Sarkar, Sudipta
Advisor: Chiu, Yun
Date Created: 2017-05
Format: Thesis
Keywords: Pipelined ADCs—Calibration
Least squares
Comparator circuits
Metal oxide semiconductors, Complementary
Abstract: A digital background calibration technique to treat capacitor mismatch, residue gain error and nonlinearity in a pipelined analog-to-digital converter (ADC) based on the split-ADC architecture (J. McNeill et al., “Split ADC architecture for deterministic digital background calibration of a 16-bit 1-MS/s ADC,” IEEE J. of Solid-State Circuits, vol. 40, pp. 2437-2445, Dec. 2005) is reported. Although multiple works have been reported before on the split-calibration of pipelined analog-to-digital converters, none of them is comprehensive, i.e., capacitor mismatch, residue gain error and nonlinearity are never treated in one work at the same time. We, for the first time, recognize the multistage pipelined ADC with residue non-linearity calibration as a Nonlinear Least Squares problem. Behavioral simulation results demonstrate the efficacy of the technique, in which the signal-to-noise-and-distortion ratio (SNDR) and spurious-free-dynamic-range (SFDR) performance of a 15-bit split-pipelined ADC are improved from 42 dB and 50 dB to 88 dB and 102 dB on average, respectively. Secondly, an 8b, 1.3/1.39GS/s, 7/8.1mW two-step ADC is presented that introduces a single reference comparator based background comparator offset calibration technique. This work employs a dual-residue based inter-stage redundancy scheme to relax residue amplifier specifications (and enable high-speed operation at 0.85V supply) in a two-step ADC. Comparator offset calibration is implemented through body biasing with an area-efficient 8b offset calibration DAC. A prototype in 28nm Complementary Metal Oxide Semiconductor (CMOS) achieves 6.8 effective number of bits (ENOB) and 50fJ/c-s at DC and 6.3 ENOB and 68fJ/c-s at Nyquist, at a sample rate of 1.3GS/s. The measured SNDR/SFDR improve from 29.2/40.7dB to 42.6/57.7dB after calibration. The active area is 0.05mm2.
Degree Name: MSEE
Degree Level: Masters
Persistent Link: http://hdl.handle.net/10735.1/5458
Type : text
Degree Program: Electrical Engineering

Files in this item

Files Size Format View
SARKAR-THESIS-2017.pdf 2.139Mb PDF View/Open

This item appears in the following Collection(s)


Show full item record